Filtering Shower Head for Hair

Most Australian households deliver chlorinated, mineral-heavy water through their shower — and over time, that water strips colour, moisture, and resilience from hair and skin. The Filtering Shower Head for Hair installs in minutes and filters out chlorine, heavy metals, and sediment before water reaches you. Available in Black and Silver to suit your bathroom.

What this product does

✅ Removes chlorine and heavy metals — KDF-55 filtration media reduces chlorine, lead, mercury, and hydrogen sulphide from your water supply before it contacts your hair and skin

✅ Long-lasting filter life — each filter cartridge covers approximately 10,000–12,000 litres (roughly 6–12 months of typical Australian household use)

✅ Maintains water pressure — engineered to sustain a flow rate of 8–10 L/min, compatible with most Australian standard 1/2-inch BSP fittings

✅ Fits in under 10 minutes — tool-free installation onto any standard Australian shower arm; no plumber required

✅ Two finishes — Matte Black and Silver to suit a range of bathroom styles

What you will feel

✅ Softer water on your scalp — without the drying effect of chlorine, hair wash days feel noticeably less stripping, leaving the scalp calmer after rinsing

✅ Smoother hair texture after drying — many users find their hair air-dries with less frizz once chlorine and mineral buildup are reduced at the source

✅ Less tightness on skin — showering in filtered water feels gentler; skin is less likely to feel that post-shower tightness associated with hard water

✅ Consistent water temperature and pressure — the filter housing is designed not to restrict flow, so the shower experience remains comfortable and steady

Who is this for

✅ People with colour-treated hair — chlorine accelerates colour fade; filtering at the source helps protect your investment between salon visits

✅ Those with a dry or sensitive scalp — chlorinated water can disrupt the scalp's natural balance; filtered water reduces that chemical load

✅ Anyone in a hard-water area — if you notice limescale on your taps or shower screen, you likely have mineral-heavy water that could be affecting your hair and skin

✅ People dealing with dry skin — particularly relevant for those who shower daily and want to reduce cumulative chemical exposure

✅ Renters — the tool-free installation and removable filter design means you can take it with you when you move; no modifications to plumbing required

✅ Those building a bathroom wellness routine — sits alongside shower steamers, scalp treatments, and quality hair care as a foundational upgrade to the water itself

✅ New parents and young families — filtered water for daily washing is a straightforward way to reduce the chemical load for sensitive young skin

How it works

1. Unscrew your existing shower head — standard 1/2-inch BSP connection; hand-tight removal in most Australian homes

2. Thread on the Filtering Shower Head for Hair — wrap the connection with the included thread tape, then hand-tighten onto your existing shower arm (no tools required)

3. Run water for 30 seconds — flushes any loose filter media before first use

4. Shower as normal — the KDF-55 filter media inside the head activates on contact with water, reducing chlorine and heavy metals through a redox (oxidation-reduction) reaction

Replace the filter cartridge every 6–12 months (or at the 10,000–12,000 L mark) to maintain filtration performance.

How it compares

What this replaces

A salon keratin treatment to counter chlorine damage runs $150–$300 per session. Colour top-ups brought on by fade cost a similar amount, often every 6–8 weeks. The Filtering Shower Head for Hair addresses the cause rather than the symptom — filtering chlorine at the source rather than repairing its effects with product layered on afterwards. At $149.99 with a filter life of 6–12 months, it replaces a recurring spend with a one-time installation.

Specifications

✅ Filtration media: KDF-55 (kinetic degradation fluxion, 55% copper / 45% zinc) 
✅ Contaminants reduced: Chlorine, lead, mercury, hydrogen sulphide, sediment
✅ Flow rate: 8–10 L/min 
✅ Filter lifespan: 10,000–12,000 litres (approx. 6–12 months average household use)
✅ Connection type: 1/2-inch BSP (standard Australian fitting)
✅ Compatible water pressure: 150–600 kPa
✅ Head dimensions: Approx. 110 mm diameter × 70 mm depth
✅ Available finishes: Matte Black, Silver
✅ Installation: Tool-free, hand-tighten
✅ Included thread tape: Yes — 1 roll PTFE tape included

What is included

 1 Filtering Shower Head for Hair (Black or Silver — as selected) 
 1 KDF-55 filter cartridge (pre-installed)
 1 PTFE thread tape roll
 1 Quick-start installation guide

Frequently asked questions

Does this filtered shower head work with Australian plumbing?
Yes. The Filtering Shower Head for Hair uses a standard 1/2-inch BSP thread connection, which is the Australian standard for shower arm fittings. It is compatible with the vast majority of Australian homes and apartments without any adaptor.

How do I install it?
Unscrew your existing shower head, wrap the thread tape (included) around the shower arm thread, then hand-tighten the Filtering Shower Head for Hair onto the arm. Run water for 30 seconds before first use. No tools or plumber are required. The process typically takes under 10 minutes.

How often do I need to replace the filter? 
The KDF-55 filter cartridge is rated for approximately 10,000–12,000 litres, which equates to roughly 6–12 months for a typical Australian household. If your water is particularly chlorinated or mineral-heavy, lean toward the 6-month end. Replacement cartridges are available separately.

Will it reduce my water pressure?
The head is engineered to maintain a flow rate of 8–10 L/min at standard household water pressure (150–600 kPa). Most users do not notice a reduction in pressure compared to their previous shower head. If your existing water pressure is very low, contact our support team before purchasing.

Is it suitable for rental properties?
Yes. The tool-free connection means no modifications are made to your plumbing. You can remove it when you vacate and reinstall it at your next property using the same fitting.

What contaminants does it actually remove?
The KDF-55 media reduces chlorine, lead, mercury, hydrogen sulphide, and sediment through a redox reaction. It is not designed to remove fluoride or bacteria — it targets the chemicals most commonly associated with hair and skin dryness from shower water.

Does it come with a warranty?
Yes. Contact support@painreliefaustralia.com.au with your order number for warranty enquiries. Our support team responds within 24 hours on business days.

Shipping, returns and support

✅ Free shipping Australia-wide
✅ 30-day money-back guarantee — if it's not right for you, contact our support team
✅ AfterPay, PayPal, Apple Pay and Google Pay accepted
✅ Warehouses in SA, NSW and VIC for fast dispatch 
✅ Australian-owned and operated — local support team
✅ Email support: support@painreliefaustralia.com.au